Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey
Self-Inflating Mat Yate Guide, 38 mm - Blue/Grey

WARRANTY

  • 30 days return policy
  • 24 month product warranty
  • Free consultation
  • 30 days return policy
  • 24 month product warranty
  • Free consultation

Material
Polyester
Type
Self-Inflatable Mat
Color
Blue
Length
183 cm
Width
51 cm
Thickness
3.8 cm
Weight
0.65 kg
Size
Single
Manufacturer
Yate
Thermal resistance
4
Folding in half
Yes

Savaime prisipučiantis kilimėlis Yate Guide, 38 mm

331652
98.99 €
Tax included
Monthly payment from 6.9€

Stock Quantity:
Available in Supplier store (5 pcs)
Delivery terms:
Prekę pristatysime Jums per: 3-7 d.d. DPD (3.99 €)
NEMOKAMAI Prekę pristatysime Jums per: 3-7 d.d. DPD Pick up (0.00 €)
NEMOKAMAI atsiimkite friday, may 10 d., parduotuvėje, Ateities pl. 23 b, Kaunas (0.00 €)

Description

A light top material and a lightweight core with WARM ZONE put together one of out lightest model. At the same time it still offers a comfortable thickness of 3,8 cm and maximum sleeping area. Best for high mountains and climbing.

Self inflating mats

Instructions for use: Before use, remove all objects from the base under the mat, which could damage its surface, open the valve and unfold the mat.

The REVERSE valve is opened by pulling out and closes by pushing - see description of valve use below. The length of inflation depends on the method of storage before use. You can inflate the mat with your mouth or a special YATE pump (the pump will ensure that moist air does not enter the mat, which insulates less). Close the valve.

General information: Do not leave the mat inflated with the valve closed in direct sunlight and at high temperatures (above 30 ° C)! In these cases, you should always open the valve. If you use the mat in high temperatures, drop a little air to release the pressure. This will prevent possible damage to the product. Do not expose to direct fire!

Protect from sharp objects. Protect from contact with chemically aggressive substances (acids, caustics, solvents, repellents, fatty creams and other substances), which could damage the product. Store the mat dry and clean and dry place. Clean with soap and water. Tolerances of  thickness and weight may vary 10%.

Guarantee of quality

Modern products are usually not only pleasant to the eye but also have many technical amenities and details which are hidden but dramatically improve quality of the product and make it unique. Self-inflating mats have three major quality factors 1) light weight 2) small size when packed 3) long lifespan.

The light weight is achieved by selection of high-quality materials both for surface of the mat and the core.
This material must be not only light but also firm and durable. We also lighten the mat by using lightweight inner foam. However this is not done at the expense of comfortability and insulation qualities of the mat. The choice of material and the way of lightening of the mat has significant impact on the size of packed mat.
 
All of our product has double layer of insulation which prevents air against air leaking, this insuation is applied to top layer of the fibre. This ensures maximum protection and long lifespan of the product. Each mat is tested for 24 hours after manufacturing, which helps us avoid selling defective products.
 
Thermal Resistance
Thermal resistance is the feature which is today usually stated with sleepíng mats. Thermal resistance - R is physical quantity which states thermo-isolational properties of a material. It is dependent on thickness of the material and λ. When we want to make R as high as possible, we aim for the maximal possible thickness of the material and at the same time we are trying to keep λ as low as possible. Thermal resistance R stands for resistance of 1 m2 of material against transmission of heat energy in difference of temperatures 1 K. Coefficient of thermal conductivity λ represents the ability of material to conduct thermic power. It is a value of W wich transmits through material of 1 m of thickness when the difference between temeperatures of surfaces is 1 K. Notes: R = d / λ (m2.K.W-1); d - thickness of the material (m); λ - Coefficient of thermal conductivity of the material (W.m-1.K-1).
 
ANTI-SLIP SURFACE „YATE MICRO BRUSHED“
When sleeping in nature - the place for the mat is not usually perfectly flat and thus even the best mat may not entirely serve to its purpose, when you slip off with your sleeping bag. For this reason ve evolved special surface with anti-slip material „MICRO BRUSHED“ which increases the friction and prevents the sleeping bag from slipping.

About Yate

10561609_528695377230072_2437454487824356061_n.jpg

YATE was founded in 1991 and at first focused only on business activities in the field of sports, camping and outdoor. Since 1995, YATE has been dealing with the processing of polyethylene foam and it has gradually started to expand its  offer with its own products. At first, they were simple products such as seats and floating boards. Gradually, YATE equipped the production with the necessary machines for cutting, cutting, milling, gluing, thermoforming and other material processing, so that YATE is currently able to satisfy almost all customer requirements. Thanks to new technologies, YATE's production has begun to focus on industries other than sports, so YATE currently also produces for the automotive industry, packaging materials and other industries. In sports, YATE still focuses mainly on outdoor and fitness, because there are the main assortment of foam pads (mats, yoga mats, exercise floors, etc.). Since 2014, YATE has also been intensively engaged in the development and production of archery targets that have been developed in company - other than from polyethylene foam.

Important

ce_mark.svg

CE ženklinimas yra prekės gamintojo deklaracija, kad produktas atitinka jam taikomus Europos Komisijos direktyvų reikalavimus (plačiau skaitykite čia).

Prekių nuotraukos bei video skirtos tik iliustraciniams tikslams. Originalių produktų parametrai, spalvos, užrašai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Vizualinė prekių medžiaga nenurodo prekių komplektacijos, todėl būtina vadovautis prekės aprašyme ir specifikacijose pateikta informacija.

Kilus klausimams, lauksime Jūsų skambučio telefonu +370 630 67777 arba žinutės el. paštu info@powersport.lt

16 other products in the same category:

Comments All reviews

Summary

0

(0 Reviews)

Select a row below to filter reviews.

  • 5
    (0)
  • 4
    (0)
  • 3
    (0)
  • 2
    (0)
  • 1
    (0)
You cannot post a review because you are not logged as a customer

Log in / sign up
Sort By

No customer reviews for the moment.

SPORTING GOODS STORE IN KAUNAS

Ateities pl. 23 b, Kaunas. Open I - V:  9.00 - 18.00 

+370 630 67777 | info@powersport.lt

Need advice?

+370 630 67777

or email: info@powersport.lt

SPORTING GOODS STORE

Working

I - V:  9.00 - 18.00

VI: 10.00 - 14.00

Ateities pl. 23 b, Kaunas

Product added to wishlist
Product added to compare.