Chilli 3000 Shredder stunt scooter

Chilli Pro 3000 stunt scooter, designed for young riders. An excellent choice when looking for the most reliable of the small scooters. Wide chromium-molybdenum alloy handlebar, one-piece alloy rims and high-quality wheels.

Suitable for children up to 140 cm tall.

• Handlebar: Y-bar 480mm H x 480mm W
• Clamp: 3-bolt CNC aluminium clamp
• Compression: Universal HIC
• Deck: 6061 aluminium (45 x 11.5 cm)
• Wheels: 100mm spoke wheels, aluminium core 90A
• Bearings: ABEC 9
• With brake
• Height: 70 cm
• Weight: 3.1 kg

STUNT SCOOTER RULES OF USE

Safety measures

As with other moving devices, riding a scooter can be dangerous. Before riding, read all the rules of use. Pay particular attention to the following tips:

1. Always wear protective gear, such as an ANSI, SNELL, CPSC or ASTM certified helmet, knee and elbow protection, a long-sleeved shirt and long trousers.
2. Always wear closed footwear and make sure it is properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the device's construction and do not use any accessories that were not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the grips firmly with both hands.
6. When riding the scooter, do not make sharp turns and do not lean your whole body on the grips in a turn, as they may twist and you could lose control.
7. Do not ride the scooter on slippery or wet road surfaces, as the polyurethane wheels may slip and you could lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. Riding in the rain reduces wheel grip, braking and visibility.
8. Do not ride the scooter on steep slopes, as the scooter may become uncontrollable or the brake may not work sufficiently. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Only ride the scooter on level terrain; do not ride on wet, uneven, rocky or gravel surfaces. Do not ride the scooter at dusk or at night, or on wet or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
11. Before you start riding, press the brake pedal and check that it works. With prolonged use, the brake pedal may become hot, so do not touch it after stopping, as you may burn yourself.
12. Turn the scooter's handlebar left and right and check that the mechanism works properly. Before you start riding, also make sure the grips are held firmly in place.
13. Children must always ride under adult supervision. Before riding, the supervising person should check the scooter so that all its parts are properly secured and accidents are avoided.
14. Because fingers can be pinched when assembling the scooter, adults must help children assemble and adjust it. Do not touch moving parts or clamping mechanism parts to avoid injuring your fingers. Make sure all parts are firmly fitted.
15. Failure to follow the safety tips above may result in injury.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not cover wear parts

The warranty is void if the device fails due to mechanical damage of the scooter, improper use or performing prohibited manoeuvres with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the grips are properly and firmly in place.

Third, check that the wheels are firmly attached and spin without disturbance.

After checking everything and reading the safety tips, you can start riding the scooter.

USER INSTRUCTIONS AND DEVICE MAINTENANCE

1. Turn the scooter's wheels and handlebar to check that the mechanism bearings work smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (dealer).
3. If the front part of the scooter (the handlebar) is loose, the headset mechanism is most likely not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the headset compression bolt with a hex key. Refit the handlebar and firmly tighten the handlebar clamp.
4. Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so that riding is safe.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be replaced easily. Undo the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly retighten the nuts with a wrench from both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (dealer).
6. Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften stickers or sticker adhesive.
7. Before you start riding, make sure all parts are firmly fitted.
8. Mechanisms or parts may work less well over time. If any mechanism or part does not work as it should, it is recommended not to use the device, contact the supplier (dealer) or importer and replace the mechanisms or parts with new ones.